Honey Ice -- Installation Guide (Updated)

Honey ice, as it's developer said, is a series of update for vegacomb 3.2 build 9. It is an effort by areo, and of course Newbe5 and Team for the Vegacomb 3.2.
To start enjoying this ROM is quite easy,  follow the step below:




Requirement:
A Computer with usb port
USB male to male connector (shipped with your vega)
USB drivers (from vega or POV website)
Vega ModdedStock 1.10 v2 (You don't need this for RC3.0.2x -- follow this link if you just want to install this mod)
Vegacomb 3.2 build 9 (Also not necessary for RC3.0.2x)
and Honey Ice 3.2.7 RC3.0.2x

Procedur:

1. Format your sdcard
2. Connect your tablet to it's charger (charging)
3. Install the usb driver on your computer. Double click the .exe file you've downloaded.
4. While charging, connect your tablet with your computer through the usb cable.
5. Power on your tablet in recovery mode:
          Hold the "back" button
          then, while still holding the "back" button, press "power" button to power up,
                  the back light turn on but no display on the tablet, you can hear notification sound
on your computer,
          release the "power" button and then the "back" button
          if successful you'll see notification of new device found on your computer.

6. After driver installation finished, run the HoneyIce 3.2.7 RC3.exe
7. You'll see "Entering nvflash recovery mode / nv3p server” on the tablet
Just wait until it reboot and turned off automatically.
8. Turn On your vega, now updated with HoneyIce 3.2.7
9. Calibrate screen
10. Calibrate battery
11. Go to settings/applications/manage applications/all/browser > wipe data
12. Enjoy